cattech
Local Delivery Truck Driver
Posts: 1
|
Post by cattech on Feb 14, 2013 7:06:35 GMT -5
Hey guys, This is my first post on here. I just started my first kit, and I'm absolutely loving it. Can't wait to do another one. I'm building a amt k-123, and I'm trying to put the rear wheels onto the brake drums and hubs. Before I put the hubs to the drums should I have put a spacer in there so the outter wheels would go down on the hub?? Any help would be appreciated guys. Thanks, Dustin.
|
|
roym
Local Delivery Truck Driver
Posts: 6
|
Post by roym on Feb 18, 2013 8:59:45 GMT -5
I'm just at that point on that kit as well, I dunno to be honest. I suppose just glue drum to wheel and glue wheel to wheel; that's my plan anyway. Dunno if we're still going to be around to see how we get on..
|
|
rnagle
CDL Student Driver
Posts: 564
|
Post by rnagle on Feb 18, 2013 11:08:37 GMT -5
Looks like hubs to drum, then drum to to inner wheel. Everything should glue up as an assembly, hub will project through centre of wheels just like on the real trucks. If you are keeping the kit chrome outer wheels paint inner wheel/hub/drum first before attaching outer wheel.
|
|