|
|
Post by truckabilly on Jun 5, 2015 6:47:31 GMT -5
Interesting idea. Good work on the frame save. The paint work takes it a bit down with the bleeding color but I know how difficult it is to mask the stripes. I am in heap of troubles with my recent project just because the masking tape did not work quite well. Your Kenny still looks good.
Jarda
|
|
denc
Local Delivery Truck Driver
Posts: 146
|
Post by denc on Jun 5, 2015 10:33:54 GMT -5
Ray, you did an excellent restoration...it looks great!
|
|
78KW
Regional OTR Driver
Hard Time don't last...Trucker's do!
Posts: 2,467
|
Post by 78KW on Aug 5, 2015 4:15:53 GMT -5
Interesting idea. Good work on the frame save. The paint work takes it a bit down with the bleeding color but I know how difficult it is to mask the stripes. I am in heap of troubles with my recent project just because the masking tape did not work quite well. Your Kenny still looks good. Jarda Thanks, Jarda. I have since found a better masking tape, but I'm still trying to improve my masking skills.
|
|
|
Post by plastictrucker on Aug 26, 2015 7:42:10 GMT -5
Ray,nice little coe you have built. Really looks the part. I have a suggestion about masking, use Tamiya tape .Roll it out on some glass and with a sharp knife and straight edge cut a new edge on the tape. Burnish it down with a tooth pick or something like that, do it again, again, then check it again. Finally remove the tape as soon as possible before it cures, it comes out smoother if not left to cure.
|
|
78kw
Local Delivery Truck Driver
Posts: 120
|
Post by 78kw on Sept 1, 2015 19:36:46 GMT -5
Ray,nice little coe you have built. Really looks the part. I have a suggestion about masking, use Tamiya tape .Roll it out on some glass and with a sharp knife and straight edge cut a new edge on the tape. Burnish it down with a tooth pick or something like that, do it again, again, then check it again. Finally remove the tape as soon as possible before it cures, it comes out smoother if not left to cure. That's a good idea. I do have Tamiya masking tape. I will try that method next time.
|
|