|
Post by buildinagin on Oct 6, 2007 20:17:35 GMT -5
I have the wrecker body from the Can-Do kit but what KW cab and axle setup do I need to replicate this the most difficult part of this is I have no way to get any detail pictures or measurements. Any suggestions will be welcomed.
|
|
|
Post by chevymaniac on Oct 6, 2007 21:49:07 GMT -5
You are going to need T800W hood conversion. I think plaskit has it .
Later Dan
|
|
|
Post by rwaldram on Oct 6, 2007 23:37:59 GMT -5
Try KFS for the twin steer as they have a white metal '8 wheel' sttering set that includes pretty much everything you'll need for the front end. The only exception to this is that if one or both of the front axles are driven, in which case you'll also need to buy the driven front axles (and modify one of them).
you might find that the distance from the front axle to the rear is the same as that of the can-do wrecker just with the addition of the extra steer.
|
|
|
Post by towguy76 on Oct 7, 2007 14:33:43 GMT -5
Here is a rear shot of that truck before it got lettered. look in my Stepps kit build in the shop for some more pics of the multiple winch setup. [/quote]
|
|
|
Post by buildinagin on Oct 8, 2007 6:03:50 GMT -5
Thanks for the input, I dont know which way to go yet.
Gene
|
|