hampton
Local Delivery Truck Driver
Posts: 29
|
Post by hampton on Feb 25, 2008 18:03:07 GMT -5
I want to make the frame at the rear of my l700 slanted for the trailer to slide to the 5th wheel, anyone have any ideas or is their parts I can order to attach to the top of the frame to achieve this look.
|
|
|
|
Post by plastictrucker on Feb 25, 2008 20:01:26 GMT -5
When I finished assembling my frame,I thought the same thing you are.My solution was to make a wedge from the rear to almost touching the fifth wheel.They are almost as high as the fifth wheel when sitting in the flat position.I used an old mud flap for my material.I also used a cross member at the very rear of the frame.These ramps really improve the look.I don't have a camera,so I can't show them.
|
|
hampton
Local Delivery Truck Driver
Posts: 29
|
Post by hampton on Feb 25, 2008 22:35:08 GMT -5
the cross member at the rear is a good idea I will have to find one and put back there
|
|
hampton
Local Delivery Truck Driver
Posts: 29
|
Post by hampton on Mar 9, 2008 6:10:07 GMT -5
When I finished assembling my frame,I thought the same thing you are.My solution was to make a wedge from the rear to almost touching the fifth wheel.They are almost as high as the fifth wheel when sitting in the flat position.I used an old mud flap for my material.I also used a cross member at the very rear of the frame.These ramps really improve the look.I don't have a camera,so I can't show them. By chance do you have an extra cross member for the rear ? if so how much $ |
|
